System Connections; Connecting To A Tv With Video (Composite) Input Terminal; Connecting To A Tv With S-Video Input Terminal; Connecting To A Tv With Scart Input Terminals - Kenwood DV-502 Instruction Manual

System Connections

Make connections as shown below.
When connecting the related system components, refer also to the
instruction manuals of the related components.
Caution:
Do not plug in the power lead until all connections are com-
pleted.
Except for U.S.A. and Canada
Caution
Be sure to adhere followings. Or proper ventilation will be blocked causing damage or fire hazard.
÷ Do not place any objects impairing heat radiation onto the top of unit.
÷ Leave a space around the unit (from the largest outside dimension including projection)
equal or greater than, shown below.
Top panel : 50 cm

Connecting to a TV with video (composite) input terminal

TV
(For Europe and U.K.)
Audio cord and video cord

Connecting to a TV with S-video input terminal

TV
(For Europe and U.K.)
Audio cord
S-video cord
Connecting to a TV with SCART input terminal
TV
Side panel : 10 cm Back panel : 10 cm
AV
DIGITAL OUTPUT AUDIO OUTPUT VIDEO OUTPUT
(PCM/BIT STREAM)
DIGITAL COAXIAL
L
R
S-VIDEO
AV
DIGITAL OUTPUT AUDIO OUTPUT VIDEO OUTPUT
(PCM/BIT STREAM)
DIGITAL COAXIAL
L
R
S-VIDEO
AV
DIGITAL OUTPUT AUDIO OUTPUT VIDEO OUTPUT
(PCM/BIT STREAM)
DIGITAL COAXIAL
L
R
S-VIDEO
Malfunction of microcomputer
If operation is not possible or erroneous dis-
play appears even though all connections
have been made properly, reset the micro-
computer referring to "In case of difficulty".
TV
(For other countries)
DIGITAL OUTPUT
(PCM/BIT STREAM)
OPTICAL COAXIAL
Audio cord and video cord
TV
(For other countries)
DIGITAL OUTPUT
(PCM/BIT STREAM)
OPTICAL COAXIAL
Audio cord
S-video cord
(For Europe and U.K.)
DV-502/DVF-3050 (EN/K,P,T,M,Y)
VIDEO OUTPUT COMPONENT
VIDEO OUTPUT
Cr
AUDIO OUTPUT
L Cb
R
Y
S-VIDEO
VIDEO OUTPUT COMPONENT
VIDEO OUTPUT
Cr
AUDIO OUTPUT
L
Cb
R Y
S-VIDEO
11
fl