Table of Contents
Advertisement
Option B – Remote mounted gauge
1. Remove gauge tee from pump assembly and remove fitting (003-M1212) from tee.
2. Thread straight fitting (003-A3812) into both the removed tee and the one still on the pump
assembly.
003-A3812
3. Attach gauge holder (001-4717B) to the tee assembly by threading gauge into it. Additional ½" flat
washers may be needed as spacers to ensure a tight fit.
Step 2
Step 3
Remove this section
Step 1
003-A3812
5
Step 2
Step 3
Advertisement
Table of Contents
