Panasonic WX-SA250P Operating Instructions Manual page 29

Important
Antenna placement
● This software places antennas according to the number of microphones placed.
● If an area is larger than the antenna coverage area (wireless reach), the message "Reconsider the antenna
placement" appears after executing recommended antenna placement (page 33), and then the result
becomes "Invalid". In this case, redisplay the mapping screen, revise the size of the area for using
microphones or change [Mic usage side] to place the microphones at the side where an antenna is set.
● For details on wireless synchronization (main standard antenna / sub standard antennas), refer to Operating
Instructions of WX-SR204P.
Number of microphones, system configuration, and antenna placement example
Number of microphones
Up to 2 microphones
From 3 to 4 microphones
From 5 to 6 microphones
From 7 to 8 microphones
From 9 to 10 microphones
From 11 to 12 microphones
From 13 to 16 microphones
From 17 to 18 microphones
From 19 to 20 microphones
From 21 to 24 microphone
(maximum configuration)
If the area is large, the necessary antennas are placed at the recommended antenna positions.
The following figure is an example of 16 microphones and an example of using two systems with two
WX-SR204P, WX-SE200P, and WX-SA250P.
System configuration
SR202P x1
SR204P x1
SR202P x1
SR204P x1
SR204P x1
SE200P x1
SR202P x1
SR204P x1
SE200P x1
SR204P x2
SE200P x1
SR204P x2
SE200P x2
SR202P x1
SR204P x2
SE200P x2
SR204P x3
SE200P x2
SR204P x3
SE200P x3
29
Antenna placement example