Table of Contents
Advertisement
Configuring Monitors for Patients
6.
Select the
1. If the Select time zone option is grayed out, select the check box (un-check) next to
time zone
the Automatic time zone option. The Set time zone option should become available.
2. Select Select time zone. A screen similar to the following appears:
3. Slide your finger tip to scroll up or down to the time zone that you want to set the
monitor to. The time zone you selected appears under the Select time zone option:
4. Select the check box next to Automatic date and time to allow it to be automatically
updated when a service is available. A check mark appears to indicate that this option
is selected.
3 - 34
© 2014 Honeywell HomMed. All rights reserved.
P4820EN.04
4/16/14
Advertisement
Table of Contents
