Sony XM-GS100 Service Manual

SERVICE MANUAL
Ver. 1.0 2012.02
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
330 watts minimum continuous average power into 4 ohms, 20 Hz to 200 Hz with no more than 1.0% total
harmonic distortion per Car Audio Ad Hoc Committee standards.
Other Specifications
Circuit system
Inputs
Outputs
Suitable speaker impedance
Maximum outputs
Rated outputs (supply voltage at 14.4 V)
SN Ratio
Frequency response
Harmonic distortion
Input level adjustment range
9-893-425-01
Sony Corporation
2012B33-1
©
2012.02 Published by Sony Techno Create Corporation
SPECIFICATIONS
Class D Technology
Pulse power supply
RCA pin jacks
High level input connector
Speaker terminals
Through out pin jacks
2 – 8 Ω
1,100 W (at 2 Ω)
600 W (at 4 Ω)
600 W RMS (50 Hz 1.0 % THD + N,
at 2 Ω)
330 W RMS (20 – 200 Hz, 1.0 %
THD + N, at 4 Ω)
65 dBA (Reference 1 W into 4 Ω)
10 – 300 Hz ( dB)
0.1 % or less (at 50 Hz, 4 Ω)
0.3 – 6.0 V (RCA pin jacks)
6.5 – 16.0 V (High level input)
XM-GS100
Subsonic filter 6 – 70 Hz, 12 dB/oct
Low pass filter 50 – 300 Hz, 12 dB/oct
Low boost 0 – 10 dB (40 Hz)
Power requirements 12 V DC car battery
(negative ground)
Power supply voltage 10.5 – 16 V
Current drain at rated output: 54 A (at 2 Ω)
Remote input: 1 mA
Dimensions Approx. 272 × 51 × 202 mm
3 1
(10 / × 2 / × 8 in)
4 8
(w/h/d) not incl. projecting parts and
controls
Mass Approx. 2.5 kg (5 lb 9 oz) not incl.
accessories
Supplied accessories Mounting screws (4)
High level input cord (1)
Design and specifications are subject to change without notice.
MONAURAL POWER AMPLIFIER
US Model