Hitachi BD-D120XGV Instruction Manual page 58

Care and Maintenance (Continue)
Cleaning the fabric softener route.
[Preparation] Open the tap.
1
Open the cover of the fabric softener dispenser and fill the dispenser with hot
water (about 40°C).
Fill with the liquid up to [Max] mark.
2
Close the cover of the fabric softener dispenser.
3
Follow the instructions below to start the cleaning operation.
You cannot use the liquid detergent and setting at the same time.
Press
P ress
Press and hold the button after the tone and the number will appear in the remaining time
display.
P ress
Each time you press the button, the display switches between [More] and [Less] and the
time will be shown in the remaining time display.
4
Press
After the time set above has elapsed, the machine will beep and turn off automatically.
After cleaning, remove the liquid detergent dispenser or softener dispenser, discard any remaining water
and wipe the inside of the dispenser and the area around the dispenser mounting part thoroughly with a
soft cloth.
58
to turn on the machine.
for at least 3 seconds.
and select [4 minutes] or [9 hours].
to start the machine.