Hitachi BD-D120XGV Instruction Manual page 18

Control Panel and Display (Continue)
13
Fabric Softener button
For model :
BD-D120XGV
BD-D100XGV
14
Liquid Detergent button
For model :
BD-D120XGV
BD-D100XGV
15
Remote button
For model :
BD-D120XGV
BD-D100XGV
16
Reload
17
Wash/Dry Mode button
18
Dry Option button
18
J
Time Dry option.
Spin speed.
K
No spin(No) : Spin is cancelled and rinsed water is drained in Rinse process
only.
L
Water temperature.
The (Cold) symbol is on when the heater is off (Cold setting).
M
Progress indicator.
Shows which phase of the program is operating. The following symbols blink
while each phase is running, and go off as each phase ends.
Prewash.
Main Wash.
Rinse.
Spin.
Dry.
Press this button when want to put fabric softener into tub automatically during
washing process. This function cannot operate in the Tub Wash, Hot Tub Wash,
and Spin.
When you want to change the input amount
Press this button when want to put liquid detergent into tub automatically during
washing process. This function cannot operate in the Tub Wash, Hot Tub Wash,
and Spin.
When you want to change the input amount
Press this button when you want to operate the washer dryer from a smartphone
application.
*You can add fabric when the
the water become high level and the temperature up to 55°C
You can select 3 operating modes: Wash mode, Dry mode and Wash/Dry mode by
pressing this button repeatedly.
Wash mode Wash/Dry
mode
Enables to add option of "Low Temp." or "Extra dry".
Low Temp.: Enables low temperature drying for less clothes damage.
Extra Dry: Enables dried more firmly than usual. Use when you feel that the
dryness is weak.
*When you want to use this function, you must set the operation mode to Wash/Dry
mode or Dry mode..
page 34
page 34
symbol is shown on the display. Available before
Dry mode