Cleaning And Servicing - Bosch BI.7101 Series User Manual And Installation Instructions

en Cleaning and servicing
Follow the instructions in the Home Connect app.
3.
16 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
16.1 Cleaning products
You can obtain suitable cleaning products from after-
sales service or the online shop.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
Do not use harsh or abrasive detergents.
▶
Do not use cleaning products with a high alcohol
▶
content.
Do not use hard scouring pads or cleaning
▶
sponges.
Only use glass cleaners, glass scrapers or stainless
▶
steel care products if recommended in the cleaning
instructions for the relevant part.
Wash sponge cloths thoroughly before use.
▶
16.2 Cleaning the appliance
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
Do not use steam- or high-pressure cleaners to
▶
clean the appliance.
WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
Allow the appliance to cool down before cleaning.
▶
Requirement: The appliance is switched off.
Clean the appliance with a damp cloth and a neutral
1.
cleaning agent, such as washing-up liquid and wa-
ter.
12
15.2 Data protection
Please see the information on data protection.
The first time your appliance is registered on a home
network connected to the Internet, your appliance will
transmit the following types of data to the
Home Connect server (initial registration):
¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi
communication module installed).
¡ Security certificate of the Wi-Fi communication mod-
ule (to ensure a secure data connection).
¡ The current software and hardware version of your
appliance.
¡ Status of any previous reset to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use the Home Connect functions for the first time.
Note: Please note that the Home Connect functions
can only be utilised with the Home Connect app. In-
formation on data protection can be retrieved in the
Home Connect app.
Dry with a soft cloth.
2.
16.3 Cleaning the stainless steel surfaces
Always remove limescale, grease, starch or albumin
1.
stains immediately.
Corrosion may form under such stains.
Clean with water and some washing-up liquid.
2.
Dry with a soft cloth.
3.
16.4 Cleaning the glass front
Clean the glass front using a glass cleaning product
▶
and a soft cloth.
Do not use any abrasive sponges that may
‒
scratch or any glass scrapers.
16.5 Cleaning the glass plate
Clean the glass plate using a glass cleaning
1.
product and a soft cloth.
Do not use any abrasive sponges that may
‒
scratch or any glass scrapers.
Dry with a soft cloth.
2.
16.6 Cleaning the control panel
Clean the control panel with a damp cloth and neut-
1.
ral cleaning agents, such as washing-up liquid and
water
Do not use any abrasive sponges that may
‒
scratch or any glass scrapers.
Dry with a soft cloth.
2.