Hitachi CP-X960WA Service Manual page 10

Message table
On-screen display
The following messages are displayed on the screen.
"CHANGE THE LAMP"
"AFTER REPLACING LAMP, RESET
THE LAMP TIMER"
"CHANGE THE LAMP"
"AFTER REPLACING LAMP,
RESET THE LAMP TIMER"
"THE POWER WILL TURN OFF
AFTER 20 hr."
Blinking of "CHANGE THE LAMP"
"AFTER REPLACING LAMP,
RESET THE LAMP TIMER"
"THE POWER WILL TURN OFF
AFTER 0 hr."
"NO INPUT IS DETECTED"
"SYNC IS OUT OF RANGE"
Lamp has 1,700 hours on it and may need to be changed.
Lamp has 1,979 hours on it.
See P.6 "Reset the lamp timer"
When the lamp has 2,000 hours or more on it, the message will blink, and the
power will turns off after 10 minutes.
Signal is not input.
The horizontal or vertical frequency of the input signal exceeds the range of
the projector, it cannot be displayed.
– 7 –
CP-X960WA
CP-X970W