Huawei SmartLogger1000 Quick Manual page 7

• Log in as installer. The initial password is 00000a.
• Use the initial password upon first login and change it immediately after login. To ensure
account security, change the password periodically and keep the new password in mind. Not
changing the initial password may cause password disclosure. A password left unchanged
for a long period of time may be stolen or cracked. If a password is lost, devices cannot be
accessed. In these cases, the user is liable for any loss caused to the PV plant.
3. Insert the USB flash drive that stores all files.
4. Choose System Maintenance > Import all files.
The Importing progress bar is displayed.
Do not power off the SmartLogger3000 when importing all configuration files.
5. After the import is complete, click OK. The SmartLogger3000 restarts automatically.
After the import is successful, the SmartLogger restarts for the configuration files to take effect.
Ensure that the parameters on the Settings tab page and the parameters for the built-in MBUS
are correctly set. After the configuration files take effect, the WLAN, SSID, and password are
changed.
6. Remove the USB flash drive. All configuration files are imported.
Method 2: SmartLogger3000 WebUI
1. In the address box of a browser, enter https://
the SmartLogger) and press Enter.The login page is displayed.
• Log in as admin. The initial password is Changeme. When you log in to the WebUI for
the first time, you are forced to change the password.
• Use the initial password upon first power-on and change it immediately after login. To
ensure account security, change the password periodically and keep the new password in
mind. Not changing the initial password may cause password disclosure. A password left
unchanged for a long period of time may be stolen or cracked. If a password is lost,
devices cannot be accessed. In these cases, the user is liable for any loss caused to the PV
plant.
2. Choose Maintenance > System Maint. and click Import under Full profile Import. A dialog
box is displayed, indicating that the SmartLogger3000 will restart after the import. Click
Confirm. Enter the password again, and click Submit.
If the exported full configuration file is not encrypted (not the user login password), deselect
Decryption password of the imported file in Re-authentication during import.
3. Click Choose File, select the exported full configuration files, and click Import.
A dialog box is displayed, indicating that the SmartLogger3000 will restart after the import.
Click Confirm. The Importing progress bar is displayed.
4. After the import is complete, click Confirm. The SmartLogger3000 restarts automatically.
The configuration files are successfully imported.
5. Choose Maintenance > Device Mgmt. > Collect Perf. Data.
6. Select the type of the data to be collected and set the collection period.
7. Select the name of the device whose data is to be collected and click Collect Data.
8. Wait until all data is gathered. On the Monitoring page, query the collection result.
7
XX.XX.XX.XX ( XX.XX.XX.XX is the IP address of