Changing The Battery; Battery Loading; Battery Unloading - Philips VTR8100 User Manual

16 Changing the battery

16.1 Battery loading

1 Push the battery cover latch to "OPEN" direction to open
the lid.
2 Put battery into the slot as shown in below picture:
3 Recover the battery cover to the original position.
Note
The battery may explode if it is not replaced properly.
•
Only the same model or type of battery should be used
on the device.

16.2 Battery unloading

1 Push the battery cover latch to "OPEN" direction to open
the lid.
2 Take out the battery.
3 Recover the battery cover to the original position.
EN
79