The System Summary Option
When you select the System Summary option from the Main
Menu, the SETUP program displays a summary of the
configuration settings for your system.
This is the same screen you see during system startup. You can
choose not to have the system display this screen so system
startup is faster. See page 1-14 for information on disabling this
o p t i o n
Exiting SETUP
When you leave SETUP, you can save your settings, or exit
SETUP without saving your settings. You can also return all
values to the factory defaults.
To leave SETUP, press
Main Menu, you can do the following:
Load ROM
Default Values
Load Values
from CMOS
Save Values to
CMOS
E
from any SETUP screen. From the
SC
Loads the factory default settings
s t o r e d i n R O M b a c k i n t o
CMOS.
I f y o u c h a n g e y o u r s y s t e m
c o n f i g u r a t i o n a n d t h e n
h a v e p r o b l e m s , y o u c a n
l o a d t h e R O M v a l u e s t o
b o o t t h e s y s t e m a n d s t a r t
o v e r .
Loads the current values stored in
CMOS for all SETUP options. This
ignores any changes you have
made using SETUP.
Saves the configuration changes
you have made to CMOS.
Setting Up your System
1 - 1 9