PVT DISASSEMBLY
IMPORTANT
Use the correct Drive Clutch Puller P/N: 2872085
1. Remove the outer clutch cover and drive belt. Refer
to "Belt Removal"page 5.12 procedure.
2. Loosen the PVT inlet hose clamp
ducting hose from the vehicle.
3. Remove the driven clutch retaining bolt
clutch.
9929399 R01 - 2018-2019 RANGER XP/ CREW 900/1000 Service Manual
© Copyright Polaris Industries Inc.
4. Install the Drive Clutch Holding Tool on the drive
clutch.
A
and remove the
5. Remove the drive clutch retaining bolt and remove
the drive clutch using Drive Clutch Puller.
B
and driven
6. Remove the fuel line
restraint.
7. Remove the bolts
to the engine and transmission.
Drive Clutch Holding Tool 9314177-A
2872085
C
from the inner clutch cover
D
that retain the inner clutch cover
PVT SYSTEM
5
5.9