Troubleshooting - Husqvarna 100-B380X Operator's Manual

TO FAST CHARGE THE BATTERY
1. Put the battery in the battery charger.

TROUBLESHOOTING

Symptoms
Battery temperature LED flashes.
Error LED flashes.
Error LED constant light.
Transportation, storage and disposal
• The supplied Li-ion batteries obey the Dangerous Goods
Legislation requirements.
6
2. Push the fast charge button.
3. To stop the fast charge, push the fast charge button.
Cause
The battery is too hot or cold.
Temporary error.
Permanent error.
•
Solution
If the battery is too hot, let it cool down
for a minimum of 15 minutes.
If the battery is too cold, move it in-
doors (+10C) for a minimum of 15 mi-
nutes.
Remove the battery from the charger or
tool and wait 60 seconds.
Put the battery in the charger and re-
start the system.
Speak to your dealer.
Obey the special requirement on package and labels for
commercial transports, also those from third parties and
forwarding agents. Obey all applicable national
regulations.
1496 - 002 - 09.02.2021