Miele HS18 Operating Instructions Manual page 53

 Connect the robot vacuum cleaner
correctly to the charging contacts on
the connected base station.
As the rechargeable battery charges,
the status indicator flashes in the
display.
The charging process takes up to 150
minutes for the Scout RX2. The process
is finished when the rechargeable
battery status indicator lights up green
permanently in the display.
You can then vacuum for up to one
hour with the Scout RX2.
Rechargeable battery status
indicator in the display
Red charged capacity approx.
0% - 20%
Orange charged capacity approx.
20% - 50%
Green charged capacity approx.
50% - 100%
Setting the time of day
You can choose between a 24 hour
clock and a 12 hour am/pm clock.
Use the remote control to set the time
of day.
 Briefly press the Clock button.
24h will appear in the display.
 Press the OK button if you want a 24
hour clock.
 Press the + button if you want a 12
hour am/pm clock and confirm 12h
with OK.
The hour display flashes in the indicator
field.
 Press the + or - direction button to
set the current hour.
 Press the OK button to confirm your
selection.
The minute display flashes in the
indicator field.
 Press the + or - direction button to
set the current minutes.
 Press the OK button to confirm your
selection.
If you want to alter the time of day,
proceed as described above. Press the
Clock button for three seconds.
Defining the area to be vacuumed

The robot vacuum cleaner is
85 mm high. Any items under which
vacuuming is required should have a
minimum clearance of 87 mm.
17