Table of Contents
Advertisement
Prior to using the instrument the user is kindly requested to read the
instruction manual and comply with it in all sections.
Failure to read the instruction manual or to comply with the
warnings and references contained herein can cause danger to life
or serious injury and damage to the instrument.
In order to avoid electrical shock, the valid safety regulations
regarding excessive contact voltages must be taken when working
with voltages exceeding 120V (60V) DC or 50V (25V)rms AC. The
values in brackets are valid for limited ranges (as for example
medicine and agriculture).
Prior to taking any measurement ensure that the test leads and
!
test instrument are in perfect condition
The instrument may only be used under the conditions and for the
purposes for which it was constructed. For this reason, in
particular the safety references, the technical data including
environmental conditions and the usage in dry environments must
be followed.
The opening of the instrument may only be carried out by
professionals, except for fuse or battery replacement.
Prior to opening, the instrument has to be switched off and
disconnected from any circuits.
Do not carry out current measurements in systems with more
!
than 250V DC
The respective accident prevention regulations established by the
professional associations for electrical systems and equipment
must be strictly met at all times.
Avoid any heating up of the instrument by direct sunlight to ensure
perfect functioning and long instrument life.
4
Advertisement
Table of Contents
