Rinse Aid; Temperature Unit; High-Temperature Final Rinse; Miele@Home - Miele PFD 101 Operating Instructions Manual

Settings 

Rinse Aid

You can adjust the rinse-aid dosage for
best results.
The rinse-aid dosage can be set from 0
to 6 ml.
3 ml is the factory default setting.
The rinse-aid dosage can turn out to be
higher than the set value due to the au-
tomatic adjustment of the program.
If stains appear on dishware and glass-
ware:
- Increase the rinse-aid dosage.
If clouding or smearing appears on
dishware and glassware:
- Decrease the rinse-aid dosage.

Temperature unit

The temperature can be displayed in
degrees Celsius or degrees Fahrenheit.
 Select the setting you want and con-
firm with OK.
90

High-temperature final rinse

For better drying, the final rinse temper-
ature can be increased for individual
programs. This function is not available
for all programs (see "Program guide").
 Select the setting you want and con-
firm with OK.

Miele@home

Your dishwasher is equipped with an in-
tegrated WiFi module.
You can connect your dishwasher to
your WiFi network.
This will increase the energy consump-
tion, even when the dishwasher is
turned off.
The Settings and Miele@home settings
menus will be added as additional
menu options.
Make sure that your WiFi network
signal strength is strong enough at
the installation site of your dish-
washer.
There are a number of ways of connect-
ing your dishwasher to your WiFi net-
work: