Display Functions - Miele PFD 101 Operating Instructions Manual

Display functions

The display is used to select or set the
following:
- the program
- the timer
- the Settings 
The display can show the following:
- the program stage
- the estimated time left for the pro-
gram to run
- the current temperature of the pro-
gram stage
- the water consumption
- any relevant fault messages and in-
formation
To save energy, the dishwasher turns
off after a few minutes if you do not
press any sensor buttons during this
time.
Touch the  sensor button to turn the
dishwasher back on.
Machine description
The OK sensor button is used to con-
firm a message or setting and also to
move to the next menu or another level.
Under  Settings, a scroll bar  will ap-
pear in the right of the display. This of-
fers additional options. These options
can be shown using the  sensor
buttons.
You can alter the dishwasher's controls
to suit changing requirements in the
Settings menu (see "Settings").
The option which is selected will have a
check  next to it.
To exit a submenu again, use the
 Back sensor button.
If you do not press any sensor buttons
for several seconds, the display will re-
vert to the previous menu. You will then
have to enter your settings again.
19