Selecting Video System - Canon LV-7575 User Manual

VIDEO INPUT
1 Press the MENU button to display the On-Screen
Menu. Press the POINT LEFT/RIGHT buttons to move
the red frame pointer to the AV SYSTEM Menu icon.
2 Press the POINT UP/DOWN buttons to move the red
arrow pointer to the desired system and then press the
OK button.
VIDEO JACK OR S-VIDEO JACK
Auto
The projector automatically detects an incoming video system, and
adjusts itself to optimize its performance.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
If the projector cannot reproduce proper video image, select a
specific broadcast signal format from among PAL, SECAM, NTSC,
NTSC 4.43, PAL-M, and PAL-N.
Y, Pb/Cb, Pr/Cr JACKS
Auto
The projector automatically detects an incoming video signal, and
adjusts itself to optimize its performance.
When the Video System is 1035i or 1080i, select the system
manually.
COMPONENT VIDEO SIGNAL FORMAT
If the projector cannot reproduce proper video image, select a
specific component video signal format from among 480i, 575i,
480p, 575p, 720p, 1035i, and 1080i.
32

SELECTING VIDEO SYSTEM

AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM Menu icon
This box indicates system being
selected.
Move the pointer (red arrow) to
system and press the OK button.
AV SYSTEM MENU (COMPONENT VIDEO)
AV SYSTEM Menu icon
This box indicates system being
selected.
Move the pointer (red arrow) to
system and press the OK button.