Before Operation; Remote Control Operation; Laser Pointer Function - Canon LV-7575 User Manual

BEFORE OPERATION

Left Side
ALL OFF SWITCH
When using the remote control unit,
turn this switch to "ON." And turn it
to "ALL OFF" when it is not in use.
INSIDE THE BATTERY
COMPARTMENT BOX
This remote control unit provides the
DIP switches into the battery
compartment box.
Slide the SW4 (LASER ON/OFF switch)
to the "OFF" position. The Laser
Pointer function is not operated.
Set the Switches 1–3 as shown in
table below depending on the Code
No. that you want to select as the
remote control code. (See page 41.)
DIP SWITCH SETTING
SW4 ........ LASER ON/OFF
SW1 SW2 SW3 Code No.
ON ON ON ON
ON ON OFF
ON OFF ON
ON OFF OFF
OFF ON ON
OFF ON OFF
OFF OFF ON
OFF OFF OFF
This remote control unit emits laser beam from the Laser Light Window when used as a Laser Pointer. When
the LASER button is pressed, the laser light goes on. When the LASER button is being pressed for more than
one minute or it is released, the light goes off. The LASER POINTER INDICATOR lights RED and LASER is
emitted with RED light to indicate the laser beam is being emitted.
The Laser emitted is the Cass II laser. Do not look into the Laser Light Window or shine laser beam onto
yourself or other people. The three marks shown below are caution labels for the laser beam.
CAUTION: Use of controls, adjustments, or performance of procedures other than those specified herein may
result in hazardous radiation exposure.
LASER POINTER INDICATOR
LASER LIGHT WINDOW

REMOTE CONTROL OPERATION

LASER POINTER
(DRAG ON) INDICATOR
Lights red while the laser
beam is emitted from the
Laser Light Window.
Lights green when dragged
to the "ON" position. (p.45)
MUTE BUTTON
Used to mute the sound.
(p.23)
DRAG ON/OFF BUTTON
Used to select the DRAG
ON/OFF position. (p.45)
LEFT CLICK BUTTON
Used as a PC mouse in
Wireless Mouse Operation.
Press this button and the
mouse pointer button to drag
the selected screen object.
(p.45)
LASER BUTTON
Used to operate the Laser
Pointer function. The laser
beam is emitted when
pressing this button for one
minute.
When using the
Pointer for more than one
minute, release this button
and press it again.
Code 1 Code 1
Code 2
Code 3
FOCUS BUTTON
Code 4
Code 5
Used to adjust focus. (p.22)
Code 6
Code 7
Code 8

LASER POINTER FUNCTION

Laser
These caution labels are put on the remote control unit.
POWER BUTTON
Used to turn the projector on
or off. (pp.20–21)
AUTO PC ADJ. BUTTON
Use to operate the AUTO PC
Adjustment function. (p.26)
IMAGE BUTTON
Used to select the image
level. (pp.29, 33)
KEYSTONE BUTTON
Used to correct keystone
distortion. (pp.22, 38)
MOUSE POINTER
Used as a PC mouse in
Wireless Mouse Operation.
(p.45)
RIGHT CLICK BUTTON
Used as a PC mouse in
Wireless Mouse Operation.
(p.45)
LENS SHIFT BUTTON
Used to select the Lens Shift
function. (p.22)
WIRED REMOTE JACK
When using as a Wired
remote control unit, connect
an Audio cable (Mini Plug
[stereo]; not supplied) to this
jack.
Battery installation is required
when using as a Wired
remote control unit.
15