Canon PIXMA Q T 1 0 8 5 1 V 0 1 Getting Started page 30

5
Connect the Ethernet cable
a
Remove the LAN connector cap from the back of the MX860 (located
just above the USB connection).
b
Connect the MX860 to your network with an Ethernet cable (not
included).
Do not attempt to connect the supplied phone cord to
the LAN port. Do not confuse the LAN port
jacks .
30
6
with the telephone
Click Yes to close the Check Wired LAN Connection reminder
If the MX860 is not detected automatically, the Set Printer
IP Address dialog appears.
The TCP/IP Setting of Get IP address automatically is correct for
most networks. If your network uses pre-assigned IP addresses
(also called fixed or static addresses), select Use following IP
address in the pop-up menu and enter the appropriate information,
then click Connect.