Canon PIXMA Q T 1 0 8 5 1 V 0 1 Getting Started page 24

5
Click Manual Setup
6
Enter network name
a
Enter the name of the network (SSID) you would like the MX860 to
join.
b
Choose an encryption method that matches what is in use for your
network.
If you do not have encryption enabled on your network,
select Do Not Use on the encryption method pop-up menu, then
click Connect. The procedure will skip directly to "Complete the
network setup" on page 25 .
24
7
Click Next
8
Enter your network passphrase, then click
The passphrase (password) is case sensitive.
9
If settings are correct, click Finish
Click Back to change any settings.
Next