Mitsubishi Electric MELSEC iQ-R Series Introduction Manual page 93

Troubleshooting by symptom
For troubleshooting related to each symptom, refer to the following.
MELSEC iQ-R System Recorder User's Manual (Application)
■Sampling target of the index modification
When the program has any index modification devices, they are not sampled.
Although D0Z0 = D100 is set here, D100 is not sampled automatically as well.
To sample D100, describe D100 in the program or set D100 in "Device Individual Specification" of "Device/Label Sampling
Setting".
[Recording Setting]  [Device/Label Sampling Setting]  [Device Individual Specification]
It is confirmed that 200 is the
input when checked online.
However, it is not applied to
the offline monitoring.
APPX
Appendix 1 Troubleshooting
A
92