Epson SC-T5400 Series User Manual page 216

SC-T5400 Series/SC-T5400M Series/SC-T3400 Series/SC-T3400N Series User's Guide
Color of Original (Background Color)
Remains in Scanned Image or
Shadows of Wrinkles Appear in
Scanned Image
Are you using the optional carrier sheet?
o
When scanning with a carrier sheet, the background
color may remain in the scan results or wrinkle
shadows may appear. If you are concerned about
these issues, follow the steps below to try to make
adjustments in Remove Background.
❏
When copying
Select Copy - Basic Settings - Image Quality -
Remove Background - Auto - Off on the Home
screen, and then set the adjustment value to a
positive value from -4 to 4.
"Copy menu (SC-T5400M Series Only) " on
U
page 170
❏
When scanning and saving to an email or folder
Select Scan on the Home screen, and then select
Email or Network Folder/FTP depending on
the target location.
Select Scan Settings - Image Quality - Remove
Background - Auto - Off, and then set the
adjustment value to a positive value from -4 to
4.
"Scan menu (SC-T5400M Series Only)" on
U
page 174
❏
When saving scanned data to an external
memory device
Select Scan - Advanced - Image Quality -
Remove Background - Auto - Off on the Home
screen, and then set the adjustment value to a
positive value from -4 to 4.
"Scan menu (SC-T5400M Series Only)" on
U
page 174
Document Feed Adjustment
If the print results and the length of the original of
copied or scanned files do not match, use the following
procedure to do Document Feed Adjustment. If you
want to shorten the length of the print out, press the
minus button. If you want to lengthen it, press the plus
button. Differences in length may occur due to the type
of paper used for printing.
A
Touch Settings on the Home screen.
Problem Solver
B
Touch, in order, General Settings - Scan
Settings - Scan Options - Document Feed
Adjustment.
The adjustment value settings screen appears.
The adjustment values are shown in %.
C
Either touch - or + to show the intended
adjustment values or touch the adjustment entry
area to enter the adjustment values via the
keyboard screen.
Adjustment values are determined as shown
below.
Example) When the length of the original is 50
cm and the print result is 50.1 cm:
50/50.1×100-100= -0.1996, rounded at the
second decimal.
Adjustment value: -0.2
D
Touch OK.
Image Stitching Adjustment
As for the original (
misalignment occurs in the scanned image, such as in
, do Image Stitching Adjustment using the following
procedure.
The arrow in
original.
A
Touch Settings on the Home screen.
B
Touch, in order, General Settings - Scan
Settings - Scan Options - Image Stitching
Adjustment.
The adjustment value settings screen appears.
216
) shown in the figure below, if a
indicates the feed direction of the