Table of Contents
Advertisement
...3.6 View Logbook
Errors
Alarms
Cals
-----
Power
VIEW LOGBOOK
1
-----
Off
12:03:04
11:34
Power
Errors
Alarms
-----
Cals
VIEW LOGBOOK
1
Sen. A
-----
ZS Cal
12:03:04
18:56
99. 2
Zero A
30. 5
Span A
Org Totals
99. 9
Zero A
98. 3
Span A
Ref Totals
View Logbook
Use the
and
keys to access the
Note. If no entries are stored in the
Power
The
logbook contains up to 2 entries (entry 1 is the most recent), each comprising
Power
the power state (On or Off), and the date/time of the occurrence.
Operating Page – see Section 2.3.
Diss. Organics
See Section 4.2.
SENSOR CAL
Advance to entry 2.
2
Note. If no more entries are stored, the display shows
View Logbook
Use the
and
keys to access the
Note. If no entries are stored in the
Calibration
The
logbook contains up to 5 entries (entry 1 is the most recent), each comprising
Cals
3 frames. Frame 1 contains the entry number, sensor letter, calibration type (Z = Zero,
S = Span, ZS = Zero and Span) and the date/time of the occurrence.
Frames 2 and 3 contain the raw outputs from the sensor for both the Zero and Span
solutions. These values equate to the percentage light transmission through the standard
solutions.
Operating Page – see Section 2.3.
Diss. Organics
See Section 4.2.
SENSOR CAL
Advance to entries 2 to 6 for single input monitors.
2 Sen.A
Advance to entries 2 to 3 for sensor A on dual input monitors.
2 Sen.A
Advance to entries 4 to 6 for sensor B on dual input monitors.
4 Sen.B
Note. If no more entries are stored, the display shows
3 OPERATOR VIEWS
logbook.
Power
logbook, the display shows
Power
logbook.
Cals
logbook, the display shows
Cals
.
No More Entries
No More Entries
.
.
No More Entries
No More Entries
.
13
Advertisement
Table of Contents
