Table of Contents
Advertisement
Changing factory default settings
Default settings are set in the oven
controls at the factory (see "Settings
overview").
A setting can be changed by altering its
status.
The settings can only be changed
when the mode selector is at Off.
Select OK.
If necessary, use or to move the
triangle until it appears under .
Confirm with OK.
appears:
If you want to change another setting,
select the appropriate number with
or .
Confirm with OK.
The setting is selected and the current
status appears, e.g., .
To change the status:
Set the desired status using or .
Confirm with OK.
The status is saved and the setting
appears again.
To change additional settings,
If you do not want to change any
proceed in the same way.
further settings, select .
The settings will remain in the memory
in the event of a power failure.
Using the oven
31
Advertisement
Table of Contents
