Operation Instructions; Raise Vehicle Using The Runways; Lower Vehicle - Bosch VLS 5235 Original Instructions Manual

en 14 | VLS 5235 | Operation
6.6

Operation instructions

DANGER – Risk of vehicle falling or tipping!
Risk of (fatal) injury when lifting (or raising) the
runway.
¶
Make sure that the vehicle is correctly
positioned and secured against rolling.
¶
Make sure that there are no persons in
the vehicle or in the vicinity of the lifting
platform.
¶
Keep a safe distance from the lifting
platform.
¶
Observe the lifting platform and vehicle.
¶
Make sure that both runways lower evenly
when setting down in the setting-down
position.
|
1 697 090 700 2014-04-10
6.6.1

Raise vehicle using the Runways

1. Drive and park the vehicle midway between two
platforms. Make sure the vehicle is correctly
positioned and secured against rolling.
2. Turn the optional switch on the control panel to
"Lifting platform" and the switches in the control
unit to "working" and "infrared on".
3. Push the "UP" button on the control panel to lift the
vehicle a bit higher from the ground and check again
if the vehicle is in a safe position.
4. Having raised the vehicle to the height needed, push
the "Safety Lock" button to ensure the mechanical
safety lock is engaged. Press the "Emergency Stop"
and check again the stability before performing
maintenance or repair work.
6.6.2

Lower vehicle

1. Switch on.
2. Press "DOWN I" button to lower the lift. It will stop
lowering when clearance between the platforms and
the ground reaches to 500mm.
3. Press "DOWN II" button to continue lowering the
platforms. Alarming buzz will be heard.
Robert Bosch GmbH