Sound; Other - Panasonic FZ-N1 Series Operating Instructions Manual

Troubleshooting
1.
Swipe up the home screen, and then in the app list, tap [Settings] (® [System])
tablet] (® [Status])
*1 Android 8.1 only
2.
Confirm the address.

Sound

No sound is heard.
•
Using the [Dashboard] app, adjust the speaker volume and make sure that the [Silent] checkbox
is turned off.
•
Customized silent mode was turned on. Turn customized silent mode off (see
"Turning customized silent mode on and off" (page 42)) or configure customized silent mode to not
mute the unit's sounds (see "Configuring customized silent mode" (page 41)).
•
Android 8.1: Do not disturb mode is set to [Total silence]. Open the notifications panel, and then
turn off Do not disturb mode or change the mode type.
Android 9: Do not disturb was turned on. Open the notifications panel, and then turn off Do not disturb
mode or configure Do not disturb settings to not mute the unit's sounds. To configure Do not disturb
settings, swipe up the home screen, and then in the app list, tap [Settings] ® [Sound] ® [Do not
disturb].
Sound stops or is distorted.
•
It is normal for the sound to stop or be distorted in the following situations.
–
When connecting or disconnecting a headset or headphones
–
When rotating the screen
Sounds are heard from the speaker even when a headset or headphones are connected.
•
Notification sounds and alarms are played using the speaker even when a headset or headphones
are connected to the unit. This is normal.
• Swipe up the home screen, and then in the app list, tap [Settings] ® [Sound] ® [Advanced], and
then tap the [Speaker off during earphone use] switch to turn it on.

Other

The date and time are incorrect.
•
Confirm the date and time settings. Swipe up the home screen, and then in the app list, tap
[Settings] ® [System] ® [Date & time].
•
Set the date and time automatically.
1. Swipe up the home screen, and then in the app list, tap [Settings] ® [System] ® [Date &
time].
2.
Tap the [Automatic date & time] and [Automatic time zone] (models supporting cellular
transmission only) switches to turn them on.
3.
Make sure the unit is in an area with good wireless reception, turn the unit off, and then turn it
on again.
•
The unit will not recognize dates after December 30, 2037.
The unit's operation is slow.
•
Ambient temperature may be too low or too high. Leave the unit in an environment of 10 °C to
35 °C (50 °F to 95 °F) for about an hour and then try again.
The unit does not respond.
•
Turn the unit off and then on again.
•
If an app does not work normally, follow the instructions below to force quit or uninstall the
problematic app or process.
Swipe up the home screen, and then in the app list, tap [Settings] ® [Apps & notifications].
1.
2.
Select the desired app or process and then tap [UNINSTALL] or [FORCE STOP].
62 Operating Instructions - Reference Manual
.
*1
® [About
*1