Supplementary items
Supplementary items
Hand strap (FZ-VSTN11AU)
Note
•
Refer to "Removing and attaching the battery cover" (page 13) and
"Installing and removing the battery" (page 18) for information about installation and removal of the
battery cover and battery.
•
Take care as there is a risk of the unit dropping when the hand strap is loose.
•
Do not use the hand strap if it is worn out or damaged.
•
For typical cleaning, wipe the hand strap with a soft, dry cloth.
–
If the hand strap becomes dirty, wet a soft cloth with water and wring it thoroughly before wiping
the hand strap.
–
Do not clean the hand strap with benzene, thinner, alcohol, household cleansers, etc., as these
may damage the hand strap.
Attaching
1.
Turn off the unit, and place it on a flat surface such as a desk with the screen face down.
•
Make sure there are no foreign objects under the unit.
2.
Remove the battery cover of the unit, and then remove the dummy mount (
•
Remove the dummy mount straight out.
3.
Attach the battery cover, insert the hand strap mount (
a click.
•
Insert the mount straight in.
56
Operating Instructions - Reference Manual
).
) into the unit, and then push in until you hear