Table of Contents
Advertisement
Installation
Installation – flush-fit
If the worktop is more than 28 mm
deep, it must be cut out underneath
on the building-in side on the right or
left-hand side.
a Worktop
b Maximum 24 mm
c 12 mm
Securing the bracket
1 bracket (supplied with the spacer bar)
must be secured centrally to the right or
left-hand side of the cut-out.
68
Wooden worktops
Fit the bracket so that it sits flush
with the top edge of the lower step of
the stepped cut-out.
Secure the bracket with the
3.5 x 25 mm wood screws supplied.
Granite and marble worktops
You will need heavy-duty double-
sided tape (not supplied) to secure the
bracket.
Stick the tape onto the upper edge of
the lower step of the stepped cut-out.
Fit the bracket so that it sits flush
with the top edge of the lower step of
the stepped cut-out.
Press the bracket firmly into position.
Advertisement
Table of Contents
