Cleaning And Care; Heater Plate Maintenance; Starting The Cleaning Program - Miele PRI 210 Operating Instructions Manual

Heater plate maintenance

Regular heater plate maintenance is essential for protecting the roller drive and the pad-
ding. Refer to the instructions in the Miele Ironing Handbook. Always wax the heater plate
after cleaning. Failure to exercise due care and attention can result in a significant reduc-
tion in the service life of the machine.
The heater plate for this rotary iron is made of aluminum.
Coarse-grained scouring agents or abrasive cleaning cloths must not be used for clean-
ing aluminum heater plates.
For optimum results, we recommend using the Miele cleaning set. The cleaning set con-
tains a cleaning cloth, a waxing cloth, and ironing wax. This set is available as an op-
tional accessory.
Residue (such as starch and detergent) can be left behind in the heater plate. For this rea-
son, clean the heater plate as appropriate for the degree of soiling before starting work.
When the red display symbol  lights up, this signals that the heater plate requires
cleaning and waxing in cleaning mode.

Starting the cleaning program

Press and hold the  button for more than 3 seconds.

The rotary iron is now in the cleaning program. 176°F (80°C) is shown in the display.
If the current ironing temperature is above 176°F (80°C), the  symbol is displayed and
the rotary iron is cooled down.
The cleaning process can be started when the  button is flashing.
Press the flashing  button to start the rotary iron in the cleaning program.

The rotary iron can then be cleaned using the cleaning cloth.

Cleaning and care

29