Water Intake Fault - Miele PFD 104 SCVi Operating Instructions Manual

Frequently asked questions

Water intake fault

Problem
The in-operation indica-
tor light is flashing
quickly.
The alarm tone is
sounding.
One of the following
messages appears in
the display:

Open water supply

Intake

Fault F18
78
Possible cause and solution
The water supply faucet is turned off.
 Open the water-supply faucet all the way.
Before remedying the fault:
 Turn off the dishwasher.
Water-inlet fault.
 Open the water-supply faucet all the way and start
the program again.
 Clean the water-inlet filter (see "Cleaning the wa-
ter-inlet filter" under "Cleaning and care").
 The water-connection pressure is lower than
7.25 psi (50 kPa).
Consult a plumber.
 The on-site connection for the water drain may be
too low and you will need to raise the water drain
(see "Hose installation" under "Installation").
A technical fault has occurred.
 Turn off the dishwasher.
 Close the faucet.
 Contact Miele Customer Service.