Remote Control; Remoteupdate - Miele PFD 104 SCVi Operating Instructions Manual

Settings 
Network configuration
You can use this menu option to reset
all WiFi module settings (if available) to
the factory default settings.
The network configuration should be re-
set whenever a dishwasher is being dis-
posed of or sold, or if a used dish-
washer is being put into operation. This
is the only way to ensure that all per-
sonal data has been removed and the
previous owner will no longer be able to
access the dishwasher.

Remote control

This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
"Miele@home" under "Settings").
If you wish to permanently turn off the
Remote control option, you can do this
under this menu option. The  sensor
button will then no longer be available
to select until you change this setting
again.
Even if the
Remote control
turned off, you can use Miele@mobile to
call up information about your machine.
However, you cannot start any pro-
grams or change any settings from it.
100
option is

RemoteUpdate

The RemoteUpdate menu option is
only displayed and can only be se-
lected if the requirements for using
Miele@home have been met (see
"Miele@home" under "Before using for
the first time").
The RemoteUpdate function is used for
updating the software in your dish-
washer. If an update is available for
your dishwasher, it will automatically
download it. Updates will not be in-
stalled automatically. They must be initi-
ated manually.
If you do not install an update, you can
continue to use your dishwasher as
usual. However, Miele recommends in-
stalling updates.
Activating/deactivating
The RemoteUpdate function is acti-
vated as standard. Available updates
will be downloaded automatically but
will only be installed if you initiate instal-
lation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.