Messages On The Display - Sony VPL-CX75 Operating Instructions Manual

Messages on the Display

Message
Could not find
connectable projector.
You can connect up to 5
projectors.
Turn off Simple Mode?
Simple Mode is ON. To
use a module other than
the USB wireless LAN
module, Simple Mode
must be turned OFF by a
user with administrator
privileges.
Insert the USB wireless
LAN module for Simple
Mode initialization.
For Simple Mode
initialization, restart
Projector Station for Air
Shot as a user with
administrator privileges.
Unable to switch the
screen resolution.
PC PJ Cause and Remedy
a
• The connectable projector cannot be found after
searching it.
c Simple Mode [On]
Check that the projector to be connected is selected in
[Option], [Simple Mode Setting] and [Connected
Projector]. (Computer)
Check that the Simple Mode is set to [On] in the setting
menu. (Projector)
c Simple Mode [Off].
Check the wireless and network settings of the
computer and the projector.
a
• You tried to connect more than 5 projectors to one
computer.
c A maximum of five projectors can be connected to one
projector.
a
• A module other than the USB wireless LAN module is
selected with Simple Mode set to [On].
c Simple Mode [On] cannot be used for a module other
than the USB wireless LAN module.
a
• Simple Mode is set to [On] and a module other than the
USB wireless LAN module is selected (when Windows
XP/2000 is logged on without using the administrator
plivileges).
c When a LAN module other than the USB wireless
LAN module is used, the computer cannot be used with
Simple Mode set to [On]. Set Simple Mode to [Off].
a
• Projector Station for Air Shot is started to install for the
first time (when Windows XP/2000 is used).
c Before using Projector Station for Air Shot, set the
Simple Mode initial setting. Insert the USB wireless
LAN module to set the Simple Mode initial setting.
When [Cancel] is selected in setting mode, the initial
setting cannot be done. (The Simple Mode initial
setting is done automatically when the computer is
used with Simple Mode set to [On].)
a
• The Simple Mode initial setting is not done (when
Windows XP/2000 is logged on without using the
administrator privileges).
c Log on using the administrator privileges and start
Projector Station for Air Shot. (The Simple Mode
setting is done.)
a
• The resolution switching of the computer cannot be done
when the main window is started or ended.
c Set [Resolution Switching] in [Option] of the computer
to [PC Setup] when this message appears every time.
PC: Message displayed on the computer
PJ: Message displayed on the projector
23
Other