Caution Messages - Sony VPL-CX70 Operating Instructions Manual

Message
Frequency is out of range!
Please check Input-A
Signal Sel.
Please replace the LAMP.

Caution Messages

Use the list below to check the meaning of the messages displayed on the screen.
Message
Not applicable!
The panel keys are locked ! • "Panel Key Lock" in the INSTALL SETTING menu is set to "On."
Meaning and Remedy
• This input signal cannot be projected as the frequency is out of the
acceptable range of the projector.
c Input a signal that is within the range of the frequency.
• The resolution setting of the output signal of a computer is too
high.
c Set the setting of output to XGA (see page 20).
• You have input RGB signal from the computer when "Input-A
Signal Sel." in the SET SETTING menu is set to "Component."
c Set "Input-A Signal Sel." correctly (see page 35).
• It is time to replace the lamp.
c Replace the lamp.
Meaning and Remedy
• You have pressed the wrong key.
c Press the appropriate key.
c All the keys on the control panel of the projector are locked.
Operate the projector with the keys on the Remote Commander
(see page 36).
49
Troubleshooting
GB