Sony VPL-CX70 Operating Instructions Manual page 24

To adjust using the control panel
Press f or F of the TILT key to adjust
the tilt of the projector.
to lower the
projector
TILT adjustment key
Powered tilt
adjuster
Notes
• When you adjust the powered tilt
adjuster with the TILT key, the V
keystone adjustment is performed at the
same time. If you do not want to perform
the automatic keystone adjustment, set
the V Keystone menu to "Manual." (See
page 38.)
• If you set the "V Keystone" adjustment
to "Auto," the "V Keystone" correction
is automatically adjusted. However, it
may not be perfectly adjusted depending
on the room temperature or the screen
angle. In this case, adjust it manually.
Press the TILT/KEYSTONE key on the
Remote Commander until "V Keystone"
appears on the screen, and adjust the
value with the M/m/</, key. The
corrected value is effective until the
power turn off.
• Be careful not to let the projector down
on your fingers.
• Do not push hard on the top of the
projector with the powered tilt adjuster
out.
It may be occurred malfunction.
7
Adjust the horizontal trapezoidal
distortion (
the "Side Shot."
24
GB
Projecting
to raise the
projector
TILT
)of the picture with
To adjust using the Remote
Commander
Press the TILT/KEYSTONE key on the
Remote Commander to display the Side
Shot menu (horizontal trapezoidal
distortion/H keystone correction) and
adjust the tilt using the M/m/</,
keys.
To adjust using the control panel on
the left side of the projector
Press the SIDE SHOT +/ – key on the
control panel to adjust the distortion.
For details, see ""Side Shot" and "V
Keystone" Adjustments" on page 55.
8
Adjust the size of the picture and the
focus.
To adjust using the Remote
Commander
Select the item to be adjusted by
pressing the LENS key, then adjust with
the M/m/</, key. Each time you
press the key, the menu changes to
LENS FOCUS and LENS ZOOM in
order.
To adjust using the control panel on
the left side of the projector
Press the ZOOM +/– keys on the
projector to adjust the size of the picture
and press the FOCUS+/– keys to adjust
the focus.