Additional Information Troubleshooting - Sony SHAKE-X30 Operating Instructions Manual

Hide thumbs Also See for SHAKE-X30:
Table of Contents

Advertisement

Additional Information
Troubleshooting
Should you encounter a problem
with your system, find your problem
in the troubleshooting checklist
below and take the corrective
action.
If the problem persists, consult your
nearest Sony dealer.
Note that if the service personnel
changes some parts during repair,
these parts may be retained.
If "PROTECT XX" (X is a
number) appears on the
display
Immediately unplug the AC
power cord (mains lead), and
check the following items.
Are you using only the supplied
• •
speakers?
Is anything blocking the
• •
ventilation holes of the unit?
After you have checked and
found no problems, reconnect
the AC power cord (mains lead),
and turn on the system. If the
issue persists, contact your
nearest Sony dealer.
General
The power does not turn on.
Check that the AC power cord
• •
(mains lead) is connected securely.
The system has entered standby
mode.
This is not a malfunction. The
• •
system enters standby mode
automatically in about 15 minutes
when there is no operation or
audio signal output (page 40).
There is no sound.
Adjust the volume.
• •
Check the speaker connections
• •
(page 16).
Check the connection of the
• •
optional equipment, if any
(page 15).
Turn on the connected equipment.
• •
Unplug the AC power cord (mains
• •
lead), then plug in the AC power
cord (mains lead) again and turn
on the system.
There is no microphone sound.
Adjust the microphone volume
• •
level.
Make sure the microphone is
• •
connected to the MIC1 or MIC2/
GUITAR jack on the unit correctly.
Make sure the microphone is
• •
turned on.
There is severe hum or noise.
Move the system away from
• •
sources of noise.
Connect the system to a different
• •
wall outlet.
Install a noise filter (not supplied)
• •
to the AC power cord (mains lead).
Turn off surrounding electrical
• •
equipment.
The noise generated by the
• •
cooling fans of the system may be
heard when the system is turned
on. This is not a malfunction.
Move the unit away from the neon
• •
signs or fluorescent light.
41
US

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Shake-x10

Table of Contents