Setting The Automatic Standby Function; Updating The Software - Sony SHAKE-X30 Operating Instructions Manual

You can only operate the system using
the buttons on the remote control.
To turn off the Child Lock function,
hold down  on the unit for more
than 5 seconds until "CHILD LOCK OFF"
appears on the display.
Note
Child Lock function will be turned off
• •
automatically when you disconnect the
AC power cord (mains lead).
Child Lock function cannot be activated
• •
when you open the disc tray.
Setting the automatic
standby function
The system enters standby mode
automatically in about 15 minutes
when there is no operation or audio
signal output.
By default, the automatic standby
function is turned on.
1
Press OPTIONS.
2
Press / repeatedly to select
"AUTO STBY", then press
3
Press / repeatedly to select
"ON" or "OFF", then press
To exit the options menu, press
OPTIONS.
Note
"AUTO STBY" flashes on the display
• •
about 2 minutes before entering
standby mode.
The automatic standby function does
• •
not work in the following cases:
— during tuner function.
— when the Sleep Timer is activated.
— when microphone or guitar is
connected.
40
US

Updating the software

The software of this system may be
updated in the future.
You can update your system's pre-
installed software from the websites
below.
Follow the online instructions to
update the software.
For customers in the United States:
<https://esupport.sony.com/US/>
For customers in Canada:
<http://esupport.sony.com/CA/>
.
.