Page 1
Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service. LG Electronics U.S.A., Inc.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CAUTION: Do not attempt to modify this product in any way without written authorization from LG Electronics Corporation. Unauthorized modification could void the user’s authority to operate this product. COMPLIANCE: The responsible party for this product’s compliance is:...
IMPORTANT SAFETY INSTRUCTIONS Important safeguards for you and your new product Your product has been manufactured and tested with your safety in mind. However, improper use can result in electrical shock or fire hazards. To avoid defeating the safeguards that have been built into your new product, please read and observe the following safety points when installing and using your new product, and save them for future reference.
Page 4
IMPORTANT SAFETY INSTRUCTIONS openings as they may touch dangerous voltage points or (Continued from previous page) short-out parts that could result in a fire or electric shock. 14. Outdoor Antenna Grounding Never spill liquid of any kind on the product. If an outside antenna or cable system is connected to the 19.
Function Status Indicators Lamp indicator, operation indicator, and temperature indicator located below the front panel controls, reveal the operating status of the DLP projection TV. Operation Indicator Temperature Indicator Lamp Indicator Power cord is not connected. Power Cord is connected, TV is in standby mode. Operation Indicator Green TV turns on.
Rear Connections Panel Connecting cables and external equipment to your TV. Fan Cover Replace or clean the filter to prevent a dust every 1~3 months. When cleaning or replacing the filter, certainly turn the power off. The dust filter must be washed in tepid water with netural detergent.
Side Connection Panel There are four jacks on the left side on your projection TV that make connecting Audio/Video devices like video games and cam- corders very simple. The jacks are like those found on the back jack connection panel. This means that most equipment that connects to those types of jacks on the rear jackpack, may be connected to the side connec- tion panel.
ANT / Cable Service Hookup Cable TV Wall Jack Panel Antenna Connect an antenna or cable service to your TV as shown. RF Coaxial Wire Turn to page 22 to do a channel search RF Coaxial Wire (75 ohm) (75 ohm) with EZ Scan for Ant/Cable connection(s).
Cable Box Connections Cable TV Locate the output jack on the back of Wall Jack Panel your cable box. Connect this to the Antenna jack on the back of your TV. Or find the composite video and audio jacks on the back of your cable box, and connect them following the instructions Output provided with your equipment.
VCR Connections Locate the Antenna jack on the back of your TV. Connect this to RF out jack on the back of your VCR. Or, find the composite video and audio jacks on the back of your VCR, and connect them following the instructions provided with your equipment.
DVD Player Find the audio and component or S-Video jacks on the back of your DVD Player and connect them fol- lowing the instructions provided with your equipment. You may connect either the com- posite video or the S-Video cables to your TV.
RGB-DTV/DVI-DTV Input Find the audio and Y, P /RGB/DVI jacks DBS Receiver on the back of your DBS receiver and con- nect them following the instructions provid- Component Out Dolby Digital Audio Y Pb Pr ed with your equipment. COMPONENT INPUT2 INPUT1 UPGRADE PORT (480i/...
RGB-PC/DVI-PC Input Find the audio and RGB or DVI jacks on the back of your PC and then connect them fol- lowing the instructions provided with your equipment. Connect these cables to your TV as shown. Computer RGB INPUT PC/DTV (XGA/ 480p/ 720p/...
External Stereo Connections Connect Left/Right Variable Audio Output to an external Audio Amplifier System. Locate both Variable Audio Out jacks on the back of your TV and the Left/Right audio input jacks on the back of your stereo's amplifier. Connect these jacks, making sure that they are connected correctly.
Home Theater: Speaker Layout This is a typical speaker layout. Any number of other speaker setups are possible, and some changes may be needed to maximize your sound. However, a Dolby Digital Receiver is required to hear 5.1 channel audio. Left and right speakers on each side of the TV enhance separation.
Monitor Out Setup Your TV has a special signal output capa- bility which allows you to hook up a sec- ond TV or monitor. Just connect the second TV or monitor to the MONITOR OUT Audio/Video jacks locat- ed on the back of your TV. See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings.
Remote Control Functions in TV Mode MODE Selects the remote operating mode: TV, VCR, Cable, DVD and Satellite. Select other operating modes, for INDICATOR LIGHTS the remote to control external Show active remote mode devices. every time any button is VCR CABLE DVD SAT pressed.
Page 19
Remote Control Functions in TV Mode VCR CABLE DVD SAT MODE LIGHT POWER POWER Turns your TV or any other TV/VIDEO SIDE programmed equipment on or off, depending on mode. COMP1 COMP2 COMPONENT 1, 2 Selects: RGB-DTV and RGB-PC Selects component signal sources, input sources.
On-Screen Displays This page describes your on-screen display and information banner options. Channel Label If a channel label has been set, Main Channel Display then it will appear here. Displays current channel number. PIP Display TV 13 This display MONO appears when PIP is active.
Front Panel Controls POWER MENU ENTER POWER MENU ENTER (Same as ENTER button on your remote control) VOLUME UP / DOWN CHANNEL UP / DOWN Operation indicator. (See page 6). See menu pages for instructions on using the on- Lamp indicator. (See page 6). screen menus.
EZ Scan (Channel Search) Automatically finds analog channels available through ANT IN input, and stores all active over-the-air and cable EZ Scan Processing EZ scan. SETUP SETUP channels in memory on the channel list. Ch. Edit VIDEO VIDEO Ch. Label Main Input AUDIO AUDIO...
Channel Add / Delete / Surf Setup EZ Scan SETUP SETUP CATV ESPN TV 11 Ch. Edit Following Screen Shown will let you edit VIDEO VIDEO Ch. Label channels and Surf List. Main Input AUDIO AUDIO Surf List Sub Input TV 11 TV 20 Booster...
Channel Labels Setup EZ Scan SETUP SETUP ESPN TV 25 A&E CMTV ESPN Ch. Edit CNBC ESP2 VIDEO VIDEO Ch. Label Following Screen TELE ACTS will let you put Main Input PLAY the logos in channels. AUDIO AUDIO VH-1 EWTN INSP Sub Input VISN...
Main Picture Source Selection Changes the picture source for the main screen so you can watch your TV, cable TV, VCR, DVD, or any other SETUP SETUP EZ Scan Ant/Cable devices that are connected to your TV. Ch. Edit Video1 VIDEO VIDEO Video2...
PIP (Picture-in-Picture) / Twin Picture Operation PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and the other source (PIP) will show a smaller inset image. Twin Picture splits the screen into 2, allowing 2 pictures to be shown on the TV screen at the same time. Each source is given half the screen.
PIP (Picture-in-Picture) / Twin Picture Operation Selecting PIP / Twin Picture Channels Press the PIP button on the remote control to select PIP or Twin picture mode. Select the Ant/Cable source with the PIP INPUT button. Use the PIPCH-/PIPCH+ button to select a channel for the sub picture. Swapping Pictures Press the SWAP button.
Booster If TV signal reception is poor because you are in a fringe area, set Booster EZ Scan to On. If the picture condition is good, set Booster to Off. SETUP SETUP Ch. Edit Adjustments for one channel don’t affect the adjustment for other channels. VIDEO VIDEO Ch.
Video Menu Options Adjust the picture appearance to suit your preference and viewing situations. EZ Picture SETUP SETUP Contrast Daylight VIDEO VIDEO Brightness Normal Color Night Time AUDIO AUDIO Sharpness Movie Tint Video Game TIME TIME Color Temperature Sports SPECIAL SPECIAL LOCK LOCK...
Page 30
• Color Temperature Adjusts levels of all colors in the TV picture: Warm, Medium, or Cool. • LG electronic’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. P A G E 3 0...
Audio Menu Options Adjust the sound to suit your taste and room situations. EZ SoundRite SETUP SETUP EZ Sound VIDEO VIDEO Balance Treble AUDIO AUDIO Bass Front Surround TIME TIME TV Speaker SPECIAL SPECIAL LOCK LOCK Prev. MENU Press the MENU button on the remote VCR CABLE DVD SAT control, then use the UP/DOWN arrow button to select the Audio menu.
Page 32
Audio Menu Options SETUP SETUP VIDEO VIDEO AUDIO AUDIO Bass TIME TIME SPECIAL SPECIAL LOCK LOCK • EZ SoundRite Scans for changes in the sound level during commercials, then adjusts the sound to match the current audio level of the TV program you are watching. •...
Auto Clock Setup Sets the time automatically from the PBS broadcast sig- nal. Auto Clock PBS Ch. SETUP SETUP Manual Clock Time Zone Auto The PBS channel signal includes information for the cor- VIDEO VIDEO Daylight Saving Off Timer rect time. Auto Clock On Timer AUDIO...
Manual Clock Setup Auto Clock SETUP SETUP Manual Clock 2 0 0 4 Year VIDEO VIDEO Off Timer Date 0 1 / 1 0 AM 10 : 44 On Timer Time AUDIO AUDIO Sleep Timer Auto Off TIME TIME SPECIAL SPECIAL LOCK LOCK...
TV Turn Off Timer Setup Lets you set an automatic daily turn off time for your TV. Auto Clock SETUP SETUP Off Timer function overrides On Timer function if they are Manual Clock both set to the same time. VIDEO VIDEO Off Timer On Timer...
TV Turn On Time Setup Time function operates only if current time is set. Auto Clock SETUP SETUP Unless a button is pressed within two hours after the TV Manual Clock is turned on by the On timer function, the TV will auto- VIDEO VIDEO Off Timer...
Sleep Timer Setup Select a preset time to turn your TV off automatically. Auto Clock SETUP SETUP 10 min Manual Clock VIDEO VIDEO 20 min Off Timer 30 min On Timer AUDIO AUDIO 60 min Sleep Timer 90 min Auto Off TIME TIME 120 min...
Auto Off If there is no input signal, the TV can be set up to switch to standby mode automatically after 10 minutes. Auto Clock SETUP SETUP Manual Clock VIDEO VIDEO Off Timer On Timer AUDIO AUDIO Sleep Timer Auto Off TIME TIME SPECIAL...
Aspect Ratio Press the MENU button on the remote control, Aspect Ratio SETUP then use the UP/DOWN arrow button to select SETUP the Special menu. Or press RATIO button to Language 16:9 instantly access the Aspect Ratio . VIDEO VIDEO Horizon Captions Zoom1...
On-Screen Menu Languages Select your preferred language for the menus: English, Spanish, or French. Aspect Ratio SETUP SETUP English Language VIDEO VIDEO Español Captions Français Caption/Text AUDIO AUDIO Key Lock Cinema TIME TIME Demo SPECIAL SPECIAL LOCK LOCK Prev. MENU Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Special menu.
Captions Setup Aspect Ratio SETUP SETUP Language VIDEO VIDEO Captions EZ Mute Caption/Text AUDIO AUDIO Key Lock Cinema TIME TIME Demo SPECIAL SPECIAL Using the menu LOCK LOCK Prev. MENU Press the MENU button on the remote control, then use the UP/DOWN arrow button to select the Special menu.
Caption/Text Mode Selection Select a closed caption mode for displaying captioning information when provided on the program. Aspect Ratio SETUP SETUP CC 1 Language Captions displays information at any position on the VIDEO VIDEO CC 2 Captions screen usually the program's dialog. CC 3 Caption/Text AUDIO...
Key Lock The TV can be set up so that it can only be used with the remote control. Aspect Ratio SETUP SETUP Language The feature can be used to prevent unauthorized viewing VIDEO VIDEO Captions by disabling the front panel controls. Caption/Text AUDIO The TV is programmed to remember which option it was...
Cinema Mode Setup Set up the TV for the best picture appearance for viewing movies. Aspect Ratio SETUP SETUP Language VIDEO VIDEO Captions Caption/Text AUDIO AUDIO Key Lock Cinema TIME TIME Demo SPECIAL SPECIAL LOCK LOCK Prev. MENU Press the MENU button on the remote control, then use the UP/DOWN arrow VCR CABLE DVD SAT button to select the Special menu.
Demo (Menu Review) EZ Demo Use to scan the features and menu options available on your TV. Aspect Ratio SETUP SETUP Language XD Demo Use to see the difference VIDEO VIDEO between XD Demo On and XD Demo Off. Captions Caption/Text AUDIO AUDIO...
Parental Lock Setup Lock System Lets you set up blocking schemes to block specific chan- SETUP SETUP nels, ratings and external sources. Set Password VIDEO VIDEO Block Ch. A password is required to gain access to this menu if the Lock System is active.
Parental Lock (Ratings Overview) Parental Lock Rating Descriptions Lock System SETUP Unlocks for channel SETUP and rating. Set Password VIDEO VIDEO Block Ch. Movie Rating AUDIO AUDIO TV Rating- Children TV Rating-General TIME TIME Aux. Block SPECIAL SPECIAL LOCK LOCK Prev.
Programming the Remote The remote control for your HD receiver is a multi-brand or universal remote control that can be programmed to operate most remote-control- lable devices of other manufacturers. Note: The remote control may not be able to con- trol all models of other brands.
Maintenance Early malfunctions can be prevented. Please read pages 2-3-4 in the front of the manual and follow the recom- mendations provided. Careful and regular cleaning of your new TV can enhance its appearance and your viewing pleasure. Be sure to turn the power off and pull out the plug before you begin any cleaning. SCREEN CLEANING 1.
Troubleshooting Some quick and easy tips to fixing problems yourself. POSSIBLE SOLUTIONS SYMPTOMS • Check your antenna connection or location. Snowy picture and unclear sound. • Check your cable input. • Check to see if the TV/VCR button on your VCR has the TV selected. •...
Page 55
Troubleshooting (Contd.) Remote control doesn’t work. • Make sure the batteries are fresh and installed properly. Menu options can’t be • Try unplugging your TV for a few minutes, changed or selected. then plug it back in. No picture or sound •...
Glossary A list of definitions for some of the words found in this guide as they relate to these TVs. 75 OHM RF CABLE The round cable that comes from an off-air antenna or cable service provider. Each end looks like a hex shaped nut with a wire sticking through the middle, and it screws onto the threaded jack on the back of your TV.
Page 57
Glossary (Contd.) A list of definitions for some of the words found in this guide as they relate to these TVs. HD-STB High-definition set-top box. INPUT Refers to the jack that receives a signal into the TV, VCR or other A/V device.
Product Specifications Model RU-44SZ83D Horizontal Size (Inches) 39.2 Height (Inches) 29.2 Depth (Inches) 14.4 Weight (lbs.) 50.7 Power Requirement AC 120V, 60Hz Television System American TV Standard, NTSC, ATSC with STB Television Channels VHF: 2 - 13 UHF: 14 - 69...