All manuals and user guides at all-guides.com CANADA : http//biz.lgservice.com : http//www.lgservice.com : http//lgservice.com/techsup.html LCD PROJECTION TV SERVICE MANUAL CHASSIS : NB-03JA MODEL : RU-48SZ40 CAUTION BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1MΩ and 5.2MΩ. When the exposed metal has no return path to the chassis the CANADA: LG Electronics Canada, Inc. 550 Matheson reading must be infinite. Boulevard East Mississauga, Ontario L4Z 4G3...
All manuals and user guides at all-guides.com SERVICING PRECAUTIONS CAUTION: Before servicing instruments covered by this service manual and 3. The components used in the unit have a specified flame resistance and its supplements, read and follow the SAFETY PRECAUTIONS section of this dielectric strength.
All manuals and user guides at all-guides.com DESCRIPTION OF CONTROLS Function Status Indicators Lamp indicator, operation indicator, and temperature indicator located below the front panel controls, reveal the operating status of the LCD projection TV. Operation Indicator Temperature Indicator Lamp Indicator TV is not connected to power outlet.
Page 6
All manuals and user guides at all-guides.com On-Screen Displays This page describes your on-screen display and information banner options. Channel Label If a channel label has been Main Channel Display set, then it will appear here. Displays current channel number. PIP Display TV 13 This display...
Page 7
All manuals and user guides at all-guides.com Front Panel Controls POWER MENU ENTER Operation indicator. Lamp indicator. Temperature indicator. POWER MENU ENTER (Same as ENTER button on your remote control) See menu pages for instructions on using the on- VOLUME UP / DOWN screen menus.
Page 8
All manuals and user guides at all-guides.com Remote Control Functions in TV Mode LIGHT MODE Illuminates the remote control Selects the remote operating mode: TV, keys. VCR, DVD, Cable, HDSTB, or Audio. Select other operating modes, for the remote to control external devices. TV/VIDEO Selects: Analog, Video1, Video2, Front video,...
Page 9
All manuals and user guides at all-guides.com Remote Control Functions in TV Mode MODE POWER Turns your TV or any other pro- FRONT grammed equipment on or off, depending on mode. NUMBER KEYPAD For direct channel selection and programming functions. ENTER FLASHBK ENTER...
Page 10
All manuals and user guides at all-guides.com Rear Connections Panel Connecting cables and external equipment to your TV. RF Connector: Antenna Used to connect analog ANT IN cable or antenna signals +75 Ω to the television, either directly or through your cable box.
Page 11
All manuals and user guides at all-guides.com Front Connection Panel There are four jacks on the right front side behind the screen on your projection TV that make connecting Audio/Video devices like video games and camcorders very simple. The jacks are like those found on the back jack connection panel.
All manuals and user guides at all-guides.com SPECIFICATION Product Specifications Models RU-48SZ40 Horizontal Size (Inches) 45.5 Height (Inches) 32.9 Depth (Inches) 15.3 Weight (lbs.) 68.3 Power Requirement AC 120V, 60Hz Television System American TV Standard, NTSC, ATSC with STB Television Channels...
All manuals and user guides at all-guides.com ADJUSTMENT INSTRUCTIONS 1. Application Object (6) SUB menu composition of each adjustment mode Adjust Mode : RGB Alignment Step 123:1 This instruction is for the application to the LCD projection TV. 10. H_Position 315/315/315 Micom:V0.50 SubMicom:V01.31...
All manuals and user guides at all-guides.com 4) Select 4. 62352, then ready to adjust 6. RNRSH, 9. 5. Assembling Adjustment GNRSH and 11. BNRSH. 5) Let’s decrease vertical line Noise by using Volume button. 5-1. Screen Tilt & Keystone Adjustment (Input a R, G, B input signal, then adjust it individually) 6) When finishing the adjustment, get out of adjustment mode (1) Required Test Equipments...
Page 15
All manuals and user guides at all-guides.com 3) Select 10. H_position with channel key in adjust mode. 2) Pattern Generator 1EA —> 16 step Gray Pattern, 64 step 4) Adjust data with using the left/right key on the remote con- Gray Pattern trol in order to be left/right semmetry screen.
Page 16
All manuals and user guides at all-guides.com 8) As shown above, output the VDP Test Pattern sig- 6. Mode : uniformity mode select --- adjustable if need nal(208/192/176/160/144/128/112/96/80/64/48/32/16) and *** 0 : 221point & 3level ---- defalut value change the RGB Data value of each step to come out *** 1 : 221point &...
Page 17
All manuals and user guides at all-guides.com 29. RLMIN : Setting up the MINIUM Level of R --- Set under <L Coefficient Calculation Method> Using 3coefficient Level Assume that the value of R/G/B MIN, MID2,MID1 is 192, 448, 30. RLMID2 : Setting up the MIDDLE 2nd Level of R --- 704.
Page 18
All manuals and user guides at all-guides.com At this time, make sure that deviation is +5~-5% and stan- dard is color coordinate of center. 5) White the miner, middle, maximum data for each point to confront to each MICOM address. 5-6.
All manuals and user guides at all-guides.com REPLACING THE LAMP * Connect your dealer or LG service center for replacing of new lamp. You must replace the lamp when: The projector image get darker or start to be deteriorated. Ø...
All manuals and user guides at all-guides.com EXPLODED VIEW Disassemble 302 and remove 2 screw of 300 bottom center to separate 300 from 400. - 24 -...
All manuals and user guides at all-guides.com REPLACEMENT PARTS LIST RUN DATE : 2004.2.16 LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION HY57V643220C(L)T6 86P 64M IC304 0IMMRHY033A IC305 0IMMRHY033A HY57V643220C(L)T6 86P 64M IC01 0IMI623200B M62320FP 16P SOP TP I/O EXPANDER 0IMCRAL006A AT24C16AN10SI2.7 8P 0IMI623200B...
Page 27
All manuals and user guides at all-guides.com LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION CHIP 2SC3875S(ALY) KEC CHIP 2SA1504S(ASY) KEC Q1001 0TR387500AA Q500 0TR150400BA Q1002 0TR387500AA CHIP 2SC3875S(ALY) KEC Q501 0TR830009BA BSS83 Q1003 0TR387500AA CHIP 2SC3875S(ALY) KEC Q502 0TR830009BA BSS83...
Page 28
All manuals and user guides at all-guides.com LOCA. NO PART NO DESCRIPTION LOCA. NO PART NO DESCRIPTION EU1ZV(1) TP SANKEN 47UF MV 50V 20% D822 0DD100009AM C110 0CE476VK6DC D832 0DR010009AA EG01C 1000V 0.5A 10A 100NSEC 50UA C1100 0CK103CK56A 0.01UF 1608 50V 10% D833 0DD100009AM EU1ZV(1) TP SANKEN...
Page 29
All manuals and user guides at all-guides.com For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible...
Page 30
All manuals and user guides at all-guides.com For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible...
Page 31
All manuals and user guides at all-guides.com For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible...
Page 32
All manuals and user guides at all-guides.com For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible...
Page 33
All manuals and user guides at all-guides.com For Capacitor & Resistors, the CC, CX, CK, CN : Ceramic RD : Carbon Film charactors at 2nd and 3rd digit CQ : Polyestor RS : Metal Oxide Film in the P/No. means as follows; CE : Electrolytic RN : Metal Film RF : Fusible...
Page 34
All manuals and user guides at all-guides.com Feb., 2004 P/NO : 3828VD0148V Printed in Korea CANADA: LG Electronics Canada, Inc. 550 Matheson Boulevard East Mississauga, Ontario L4Z 4G3 : LG Customer Interactive Center P.O.Box 240007, 201 James Record Road Huntsville,...
Page 35
All manuals and user guides at all-guides.com...
Page 36
All manuals and user guides at all-guides.com...
Page 37
All manuals and user guides at all-guides.com...
Page 38
All manuals and user guides at all-guides.com...
Page 39
All manuals and user guides at all-guides.com...
Page 40
All manuals and user guides at all-guides.com PRINTED CIRCUIT BOARD TUNER(TOP) COMPONENT(TOP) COMPONENT(BOTTOM) MAIN(TOP) MAIN(BOTTOM) DIGITAL(TOP) TUNER(BOTTOM) SMPS LINE FILTER DIGITAL(BOTTOM) DRIVER(TOP) DRIVER(BOTTOM) CONTROL(TOP) CASE S/W SIDE A/V CONTROL(BOTTOM) PRE-AMP BALLAST INT.