Anti-tip device
Included accessories
– 1 anti-tip device
– 4 screws
– 4 plugs
Installation dimensions of
locking bolt
Anti-tip device, front view
Model
HR 1421
HR 1622
HR 112x
HR 1724
HR 192x
HR 113x
HR 193x
HR 195x
(1220 mm)
106
Width
X
29 15/16"
3 13/16"
(762 mm)
(97 mm)
35 15/16"
3 13/16"
(915 mm)
97 mm
47 15/16"
3 1/4"
82 mm
Installing the range with the
anti-tip device
Wear safety shoes and gloves.
The anti-tip device should be installed
at the bottom rear of the range at the
midpoint of the width.
Measure the installation space for the
range close to floor level.
Mark the wall at the middle of the
space width.
Position the notch of the anti-tip
device on the wall marking.
The anti-tip device must fit tightly on
the floor or the wall.