Table of Contents
Advertisement
• Do not use the Jet Bot on black colored floors.
– The Jet Bot may not be able to operate normally.
• Do not place any objects within 0.5 m of either side of the Docking Station
or within 1 m of the front of the Docking Station.
• Make sure the Docking Station's charging contact is not damaged or have
any foreign matter on it.
• For the very low areas where the Jet Bot may get stuck, set the No-
go Zones with the SmartThing App or attach the Boundary Markers to
prevent the Jet Bot from getting in.
• Do not install the Docking Station in an area with a dark floor.
– If the floor around the Docking Station is dark, recharging is hindered.
• Move any obstacles that may disturb the Jet Bot's movement (such as
children's indoor swing or slides) before cleaning.
• Do not use the Jet Bot in a place which is narrower than its turning radius
0.5 m or less.
• Before operating the Jet Bot, remove the objects which could break such
as glass, a frame, a mirror, and porcelain items so that the Jet Bot works
without interruption.
• If a brush or a brush cover is not assembled correctly, scratches may occur
on the floor, or product malfunction may occur.
• Use both hands to carry the product.
• Do not place the Docking Station in a place where people pass by
frequently, in entrance way or narrow passage.
– People may trip over it and be injured, or product damage may occur.
• Do not push the Docking Station.
English 9
Advertisement
Table of Contents
