Table of Contents
Advertisement
Cleaning Functions
Cleaning Functions
Cleaning Methods
Cleaning Mode
Suction Power
Repeat Clean
Intelligent Power
Control Clean
❇ You can set the Cleaning Functions, the Repeat Clean or the Cleaning Mode at the SmartThings
App.
❇ When the Jet Bot does not have a saved map, it studies cleaning space through Auto Clean
function which starts from the Docking Station. After studying the cleaning space, a map is
saved. (The map creation is enabled through the SmartThings App only.)
❇ You can edit or delete the map at the SmartThings App.
❇ Room Clean or Spot Clean works regardless of choice sequences of the areas.
• Auto Clean: Cleans automatically until the Jet Bot completes cleaning
all rooms one time.
• Room Clean: You can select a room you want to clean.
• Spot Clean: You can set a specific area you want to clean.
• You can select one out of three modes.
❇ You can set the Cleaning Mode only when the Jet Bot is in Room
Clean.
• You can select the suction power from Max, Smart or Normal.
❇ When the Jet Bot is in 'Smart' suction power, the Intelligent Power
Control Clean work.
• The Jet Bot cleans repeatedly until its battery is discharged.
❇ After the Jet Bot completes cleaning one time and returns to the
Docking Station due to battery shortage, it does not clean again
after charging is complete.
❇ When the Jet Bot detects a carpet during cleaning, it increases its
suction power. (Suction Power: 'Smart' only)
Operation
English 21
Advertisement
Table of Contents
