Fujitsu 565Tx User Manual page 124

S e c t i o n F o u r
4. When the restart is complete a little box will
appear indicating that you are in the docked
configuration,however the display will not
use the entire screen.
5. To use the entire screen:
a. Go to the Start Menu.
b. Select S e t t i n g s by clicking on it.
c. Select Control Panel.
d. Select the Display icon by double-
clicking on it.
e. Select the < s e t t i n g s > tab and change
the resolution to 1024 x 768 pixels .
f. Change the monitor setting to L a p t o p
Display Panel(1024 x 768) .
g. Click on the < O K > button to activate the
new display settings. Your display should
now occupy the entire screen.
112
Futu re docking with Wi n dows 95 can be don e
®
in Su s pend mode , Save - to - Disk mode or wi t h
the power Off and the sys tem wi ll autom a ti c a lly
detect wh et h er you are docked , or not, wh en
you re sume opera ti on . Un docking should on ly
be done with power Off or in PC Ejected mode .