Table of Contents
Advertisement
Installation
Fig. 1
With prepared monitor trolley (new delivery)
Requirements
•
The mounting plates for the framegrabber are already fitted in the monitor trolley.
•
The guide rails for the printer, including the fan, are already fitted in the monitor trolley.
•
The cables for the video printer are already installed in the monitor trolley.
Unpacking the printer
•
Turn the box with the printer upside down and open the bottom of the box.
•
Remove the foam material.
•
Remove the plastic bag.
•
Unscrew the wooden base plate.
•
Lift the printer carefully out of the box and place it on the floor in the upright position.
•
Turn the two transport locks into vertical position and pull out in vertical position
(Fig. 1).
NOTICE
Siemens AG
Medical Solutions
Keep the two transport locks. If the printer needs to be replaced
or sent in, the transport locks must be re-inserted.
SPR2-130.814.01
Rev.01_V 03.01
2
Page 1 of 14
SIREMOBIL Compact
TD PS 24
2 - 1
2
2
2
System Manual
Advertisement
Table of Contents
