•
For best sound quality at the receiving station, hold the microphone
approximately 1.5 inches (3 cm to 4 cm) from your mouth.
RECEIVING
Select the desired zone and channel. If signaling has been programmed on the
selected channel, you will hear a call only if the received signal matches your
transceiver settings.
Receiving Group Calls
When you receive a group call and the received group ID matches the ID set up
on your transceiver, you can hear the caller's voice.
Receiving Individual Calls
When you receive an individual call, a ringing tone will sound. To respond to the
call, press and hold the PTT switch and speak into the transceiver as you would
during a normal transmission.
LED INDICATOR STATUS
Indicator Color
Lights red
Lights green
Lights blue
Blinks red
Blinks green
Blinks orange or
blue *
Blinks red/orange
•
Your dealer can set the LED to blink either orange or blue for Transceiver
operation.
Transmitting
Receiving a call
The Transceiver Password function is programmed.
Battery power is low while transmitting
Scanning
Receiving an encoded call (signaling, etc.)
The selected channel has not been programmed and
cannot be used.
Meaning
13