GE 28821 Series User Manual page 94

3. Use the caller ID-volume (6 or 5) button or key in alphabet to move to desired record, press the
delete/int/conf button, DELETE? shows on the display.
4. Press the delete/int/conf button again to confirm.
NOTE: If you don't want to change or delete a record, simply press the END button, or wait for one
minute to exit automatically.
Dialing a Number from Internal Memory
1. Make sure the phone is OFF (not in TALK mode).
2. Press the mute/menu OK button to access the phone book sub-menu.
3. Use the caller ID-volume (6 or 5) button to scroll to VIEW RECORDS .
4. Press the mute/menu OK button to confirm.
5. Use the caller ID-volume (6 or 5) button or key in alphabet to move to the desired number.
6. Press the TALK /SPEAKER buttons, the number dials automatically.
Belt Clip and Optional Headset
Connecting the Belt Clip
1. To attach the belt clip, insert the sides of the belt clip into the slots on each side of the handset.
2. Snap the ends of the belt clip into place.
Connecting an Optional Headset to the Handset
Each handset can be used with an optional headset hands free operation.
1. Connect the headset to the headset jack on the side of the handset. The handset receiver and microphone are
disabled when the headset is connected.
2. Adjust the headset to rest comfortably on top of your head and over your ear. Move the microphone to
approximately two to three inches from your mouth.
3. Press the TALK button to answer a call or make calls using the headset.
4. To return to normal operation, unplug the headset from the jack.
Changing the Battery
CAUTION: To reduce the risk of fire or personal injury, use only the Thomson Inc. approved
Model 5-2814
1. Make sure the telephone is OFF (not in TALK mode) before you replace the battery.
2. Remove the battery compartment door.
3. Disconnect the battery plug from the jack inside the battery compartment and remove the battery pack from the
handset.
4. Insert the new battery pack and connect the cord to the jack inside the battery compartment.
5. Put the battery compartment door back on.
6. Place handset in the base or handset charge cradle to charge. Allow the handset battery to properly charge
(for 16 hours) prior to first use or when you install a new battery pack. If you do not properly charge
the phone, battery performance will be compromised.
Battery Safety Precautions
• Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be
released which can cause injury.
Nickel-metal Hydride battery (Ni -MH), which is compatible with this unit.