Table of Contents
Advertisement
3. Press the
TALK
or SPEAKER button. The number dials automatically.
NOTE: Depending on (a) how the incoming caller's phone number is formatted when it is received,
and (b) whether or not you previously pre-programmed your local area code into the set up menu,
you may need to adjust the format of the incoming caller's stored phone number before making the
call, press the
redial/format
Available formats include:
Storing CID Records in Internal Memory
You may also store CID information in the phone's internal memory.
NOTE: It is important that you format CID records correctly BEFORE storing in internal memory as
you cannot reformat CID records stored in memory.
1. Make sure the phone is OFF (not in TALK mode).
2. Use the caller ID-volume (6 or 5) button to scroll to the desired CID record.
3. Press the mute/menu OK button to store the number.
NOTE: Press the
END/cancel
return to the menu.
NOTE: If the selected CID record contains any information that is non-numeric, the unit will not allow
this record to transfer to the internal user memory. The handset will display UNABLE TO STORE.
Deleting a CID Record
1. Make sure the phone is OFF (not in TALK mode).
2. Use the caller ID-volume (6 or 5) button to display the CID record you want to delete.
3. Press the
delete/intercom/conf
4. Press the
delete/intercom/conf
DELETED.
NOTE: Press the
END/cancel
records.
Deleting All CID Records
1. Make sure the phone is OFF (not in TALK mode).
2. Use the caller ID-volume (6 or 5) button to display any Caller ID record.
3. Press and hold the
delete/intercom/conf
4. Press
delete/intercom/conf
followed by NO CALLS.
NOTE: Press the
END/cancel
records.
Phone Book
Each handset can store up to fifty records in phone book for quick dialing; each record can contain a maximum of
20-digit numbers and 15-character names.
Review Records
button to adjust the number, and try again.
button once to keep the previous setting (making no changes) and
button. The display shows DELETE CALL ID?
button to erase the record showing in the display. The display shows
button to return to the standby mode without deleting any CID
button until DELETE ALL? shows in the display.
button to erase all of the current CID records. The display shows DELETED
button to return to the standby mode without deleting any CID
Advertisement
Table of Contents
