Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Contrast Adjustment
While the on-screen display system, EasyMenu
SELECT button
or
to adjust the contrast.
When you press these buttons, the status of contrast
adjustment and the input horizontal (H) and vertical (V)
frequencies of the input signal will be displayed in a
guidance image.
While the guidance is on display, press the
narrow the difference between darkness and brightness.
While the guidance is on display, press the
the difference between darkness and brightness.
You can also adjust the contrast setting via the on-screen
17
display system, EasyMenu
.
The contrast adjustment mode will exit when no keys are
entered for 5 seconds. (The adjustment status guidance will
disappear automatically.)
Sound Mute
Press the remote controller MUTE button to mute the sound temporarily.
When you press the button, [MUTE] (pink) and the status of
volume setting will be displayed in a guidance image.
• While the sound is muted, press the
down the volume.
• While the sound is muted, press the
the mute.
You can also adjust the sound volume setting of the mute via
the on-screen display system, EasyMenu
Press the remote controller MUTE button once again and the mute will be canceled and the guidance
will change to VOLUME (blue), enabling the volume to be heard.
When MUTE is used, the guide display will continue for 5 sec. and then turn off.
The set itself does not have a MUTE button.
Input Signal Status Display
Press the remote controller RECALL button to display the status of input signals on the screen.
Press the remote controller RECALL button once again to exit the screen display.
The contrast adjustment mode will exit when no keys are entered
for 5 seconds.
The set itself does not have a RECALL button.
, is not on display, press the remote controller
16
Remote
key to
controller
SELECT
key to widen
button to turn
Remote
controller
button to cancel
MUTE
.
18
Remote
controller
RECALL
Contrast setting
CONTRAST : 100
H : 46. 5kHz, V : 60. 0Hz
Input vertical
Input horizontal
frequency
frequency
Adjustment status guidance
Sound volume setting
MUTE
: 30
(The display will turn to pink.)
Input terminal name
RGB1 [D-SUB]
H : 46.5kHz, V : 60Hz
Input horizontal
Input vertical
frequency
frequency
15
Advertisement
Table of Contents
