The fax does not enter the energy saver mode in the following cases:
❏
When documents are stored in the memory.
❏
When a paper or document jam has occurred, when the paper
cassettes have run out of paper, or when the toner cartridge has run
out of toner.
❏
When a document has been fed into the automatic document feeder
(ADF).
❏
When you install either the optional Dual-line Upgrade Kit or PCL6
Printer Board.
You cannot press the
saver mode. The fax enters the energy saver mode only after the speci-
fied time has elapsed.
3-24
Getting Started
button to put the fax in the energy
Energy Saver
Chapter 3